Printronix L1024 - Manual (Page 108)

B–4 Host I/O Interfaces
Centronics Parallel Interface Configuration
The printer is configured for the Centronics interface via the “Host Interface”
menu as described in Chapter 3, Configuring the Printer. The following interface
configuration parameters may be modified to meet specific application
requirements:
Data Bit 8 Enable* or Disable
Paper Instruction Line Enable or Disable*
Data Polarity Standard* or Inverted
Strobe Polarity Standard* or Inverted
Output Polarity Standard* or Inverted
Paper Instruction Polarity Standard* or Inverted
Strobe Filter Standard* or Inverted
Fast Busy Standard* or Inverted
Trailing Edge Standard* or Inverted
* = Factory default setting