Printronix L1024 - Manual (Page 40)

2–22 Setting Up the Printer
NOTE: RS–422 can be enabled or disabled via a menu option on the control
panel under the host interface selection. Make sure this selection is
properly made for your application.
NOTE: The printer must be properly configured for the appropriate
interface. Refer to the Configuring the Printer chapter for more
information.
AC Plug
RS–232/422 Port
Centronics Parallel Port or
Dataproducts Port (with adapter)
Diagnostic Test Port
Coax/Twinax Connector
Figure 2–13. Cable Connections