Printronix L1024 - Manual (Page 48)

3–4 Configuring the Printer
Overview
The configuration process is matching the printer operating characteristics to
those of the host computer.
This chapter explains how to use the control panel to change individual settings
and save them as a customized configuration.
Figure 3–1 shows an overview of the configuration menu. The next pages
describe how to move within the menu, change configuration settings, and save
and print configurations. This is the menu structure for the LinePrinter Plus
emulation. (Menu options are explained beginning on page 3–16.)
Paper
Control
Disk
Management
Mode Maint / Misc
Host
Interface
Font
Memory
Image Width
Paper Length
Hor Image Shift
Vert Image Shift
Reprint on Fault
Page 3–17 Page 3–23
Page 3–26 Page 3–29 Page 3–32 Page 3–44
Load Config.
Save Config.
Print Config.
Delete Config.
Power–up Config.
Protect Configs.
Impact Printer Panel Key Sound
Alarm
Power–up State
Hex Dump Mode
PTX–SETUP Option
Display Language Centronics*
Dataproducts
Serial
Twinax*
Coax Max Char Memory
Max Cache Memory
Max Cache Size
Max Cached Char
Max Fonts Loaded
Font Weight
Drive B Fonts
Installed Fonts
System
Info.
Page 3–48
System Memory
Fuser Temperature
Energy Timeout
Page 3–19 Page 3–21
Test Print
Engine Life Data
Printer
Control
Diagnostics
Note: If the Twinax interface is supportedTwinax is the
factory default. If Twinax is not supported, Centronics
is the default.
Figure 3–1. The Configuration Menu