Printronix L1024 - Manual (Page 92)

3–48 Configuring the Printer
System Information Menu
System Info
System
Memory
Press UP, DOWN, NEXT, and PREV
to view options.
Press ENTER to select an option.
Press ON LINE at any time to exit
configuration (will save changes until
printer is turned off).
* = Factory Default
Figure 3–13. Font Memory Menu
System Memory
This menu item displays the amount of RAM that is available on the
motherboard. There are 8 megabytes of RAM factory–installed on the
motherboard.
Depending on the paper length selection, the following memory requirements
must be met to allow the printer to run at optimum speed:
Paper Length Memory Fonts/Forms Pages
3.0 to 14.0 inches (standard) 8 Megabytes 3 Megabytes 4 Megabytes
14.1 to 30.0 inches 12 Megabytes 3 Megabytes 8 Megabytes
30.1 to 33.00 inches 16 Megabytes 4 Megabytes 11 Megabytes
NOTE: Beyond 16 Megabytes of additional memory, all added memory is
used for fonts/forms storage.