Printronix L1024 - Manual (Page 111)

B–7 Host I/O Interfaces
Dataproducts Parallel Interface Configuration
The printer is configured for the Dataproducts interface via the “Host Interface”
menu as described in Chapter 3, Configuring the Printer. The following interface
configuration parameters may be modified to meet specific application
requirements:
Data Bit 8 Enable* or Disable
Paper Instruction Line Enable or Disable*
Data Polarity Standard* or Inverted
Strobe Polarity Standard* or Inverted
Output Polarity Standard* or Inverted
Paper Instruction Polarity Standard* or Inverted
Strobe Filter Enable or Disable*
Trailing Edge Enable or Disable*
* = Factory default setting