Printronix L1024 User Manual
Page 87
Advertising
3–43
Configuring the Printer
Series 1 Delay
Values:
0+ msec, 15+
msec, 30+ msec
Specifies the delay between receiving the poll character and sending back the
series 1 status. This delay is only approximate.
Series 1 Idle
Values:
Enable or Disable.
When enabled, the printer will send the status approximately every 2 seconds.
This status is sent if no data is being received and the buffer is empty.
RS–422 Input
Values:
Enable or Disable.
Used to enable or disable the RS–422 serial input.
Advertising