Parker Hannifin 88-021610-01G - Manual (Page 59)

Parker Hannifin
Chapter 3 Electrical Installation 59
Output Power Connector
The drive’s Motor screw terminal connector provides output power to your
motor. (For connection information, see “Output Power” on page
43 .) The
connector differs between the two largest Aries models and the others.
Specifications for the connectors follow in this section.
On models AR-01xx through AR-13xx, the Motor connector also serves to
connect an external motor brake to the drive’s internal solid-state relay (BK).
For information on this connection, see “Brake Relay (Optional)” on page
50 .
This connector is removable.
On models AR-20xE and AR-30xE, the M OTOR /P OWER connector serves as
the connector for output power to the motor, as well as for Mains power (VAC
Input Power) and a DC Link Inductor. For information on these additional
connections, see “Input Power” on page
39 and “External DC Link Inductor
(Optional)” on page 45 . This connector is not removable.
Figure 27 Output ( MOTOR ) Power Connector