Printronix LQH-HWTM - Manual (Page 247)

Example
247
Directory Command
The Directory command lists the contents of the IGP directory in IGP memory.
The directory command provides the following information:
• All form names and logo names currently defined
• The association of logos to forms
• The amount of memory used for form storage
• The amount of dynamic storage space used and available
Example
A form will not execute unless enough room exists in the memory as indicated
in the work space bytes free portion of the directory listing. To print the
directory, open a file, input the directory command, exit the file, and print. For
example:
Enter Format
DIRECT.FOM (System Format)
~DIRECTORY (cc)DIRECTORY
.PRINT DIRECT.FOM (System Format)
The Directory command can only be used when the IGP is in the Normal
mode. Upon completion of the directory listing, the IGP returns to the Normal
mode. If the IGP is not in the Normal mode, input the Normal mode command
before the Directory command.