Printronix LQH-HWTM - Manual (Page 45)

Compressed Print (Density)
45
Compressed Print (Density)
Purpose Defines the horizontal print density in characters per inch (cpi).
Mode NORMAL, EXECUTE
Format (cc) DENSITY ;n
(cc) The Special Function Control Code.
DENSITY The Density command; enter DENSITY.
n Selects the density in cpi, OCR-A, or OCR-B; enter
a value of 10, 12, 13, 15, 17, or 20 to specify the
density in characters per inch (the default is 10 cpi),
or 10A to select 10 cpi OCR-A or 10B to select 10
cpi OCR-B.
Comments Print density formats of 10, 12, 13, 15, 17, or 20 cpi are available.
Standard print density is 10 cpi. After a Density command is
entered, all subsequent alphanumerics print at the specified
density until another Density command, a Normal mode
command, or a Reset command is entered. The Density
command also permits the standard printer editing function
(carriage return editing). After the Density command is entered,
data in the print buffer can be edited as described in your printer
User’s Guide.
Example The following command selects 15 cpi printing format until
another Density command, a Normal mode command, or a Reset
command is entered.
~DENSITY;15