Printronix LQH-HWTM - Manual (Page 65)

Execute Form: Incremental Dynamic Data
65
Execute Form: Incremental Dynamic Data
Purpose Incorporates incremental/decremental capability to dynamic
alphanumeric or bar code data supplied as a part of the Execute
Form mode.
Mode NORMAL
Format (cc)EXECUTE; formname [;PAGE n] [;FC] [;ICNTn] [;IRSTn]
ICNT n Identifies the incremental form count to specify the
number of forms to generate with the incremental
fields automatically updated. Enter ICNT and
replace
n with a value ranging from 1 through
65,535 to specify the number of forms.
IRST n The optional incremental reset count parameter to
specify the number of forms to generate before
resetting all incremental fields to their starting
values. The reset count parameter is useful in
dividing the total number of forms generated into
multiple groups of identical copies. To use this
parameter, enter IRST and replace
n with a value
ranging from 1 through 65,535 to specify the reset
count (how many forms generated before resetting
the incremental fields). If the reset count value is
equal to or greater than the incremental count
value, the reset will never occur.
Example The following forms were generated from ICNT6, IRST2. (To
duplicate incremental fields within a form, refer to page 40.)
Note In the command below, incremental execute parameters are
shown in boldface type; standard execute command
parameters are shown in
italics. The general execute format
is shown on page 59.
form1 form2 form3 form4 form5 form6 = ICNT6
0
1
2 3
4
5 0
1
2 3
4
5 0
1
2 3
4
5