POLAR S720i - Manual (Page 108)

*Optional Polar Cadence Sensor or Polar Power Output Sensor required.
The graphic bar consists of five blocks. A flashing block indicates in
which level you are in the Options settings or File recalling loops.
Continuously running bars indicate that the exercise is recorded.
Indicates low battery.
Display texts
M 106
ALARM: Indicates the alarm in
watch settings.
Alt.: Indicates altitude.
AM or PM: Are used in 12h Time
mode. E.g. in 24h Time mode 13:00
means 1:00 PM.
AVG: Together with a reading
indicates average heart rate.
b0: Indicates that you have no bike
settings on.
b1: Indicates bike 1 setting.
b2: Indicates bike 2 setting.
BasicUse: Exercising without
settings.
BestLap: Indicates the shortest lap
time information. Cad*: Indicates pedalling speed
measured in rounds per minute
(RPM).
Calibrate: You can return to the
previous manually set reference
point altitude.
CONNECT: Communication mode
between wrist receiver and
computer.
Cont: Up to 30 intervals succeed
one another unless the Interval
phase is manually stopped.
CoolDown: Cool-down phase at
the end of an interval training
exercise.
E0: BasicUse settings.