POLAR S720i - Manual (Page 81)

E 79
• the heart touch function to show the current heart rate limits, store a
lap time or swap the display options during your exercise
• names and alarm times for 7 reminders
• options lock function on or off
You may upload settings from a computer to a wrist receiver either via IR
communication or via audible Polar Uplink. For IR communication please
see the previous chapter and for the Polar Uplink communication proceed
as follows:
1. Start the software.
2. If the receiver is in the Time of day display scroll up or down until
CONNECT is displayed.
3. Place the receiver less than 10 cm/ 4" from the loudspeaker.
4. Activate the heart rate monitor connection function of the software.
Do not move the receiver during the data transfer.
5. The receiver automatically starts to upload the information as UpLink
appears and you will hear a chirping sound while information is
transferred to the receiver. The receiver automatically returns to the
Time of day display after data transfer.
If the data transfer was unsuccessful bring the receiver closer to the
loudspeakers or turn the volume level of the loudspeakers up.
To be able to upload the settings from Polar Precision Performance
software via Polar Uplink, you need a personal computer with a sound
card (compatible with SoundBlaster™) and dynamic loudspeakers or
headphones.