Monitor settings – POLAR S720i User Manual

Page 41

Advertising
background image

B

39

Options

Monitor Set

Sound Units Help

On/OFF

1/2

On/OFF

Monitor settings

1. In the Time of day display

scroll up or down until
OPTIONS is displayed.

2. Press OK to enter the

Options mode. EXERCISE
SET is displayed.

3. Scroll up or down until MONITOR SET is displayed.
4. Press OK to start the monitor settings. Sound is displayed.

Turning activity/button sound on/off
If you start from the Time of day display, repeat steps 1-4.
5. Press OK to start setting the sound. On/OFF starts to flash.
6. Scroll up or down to set sound On or Off. Press OK.

Activity/button sound consists of the button sound and in the Measure and
Exercise modes the following activity sounds: start, stop and lap recording,
phase start, interval phase end and recovery calculation end sounds. It does
not consist of heart rate zone alarms, watch alarm or fitness test alarm.

Selecting measuring units
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Units is displayed.
6. Press OK to start setting the units. 1 or 2 starts to flash.
7. Scroll up or down the unit which best suits you. Press OK.

Advertising
This manual is related to the following products: