General tab field descriptions – Perle Systems 5500161-40 User Manual
Page 146
Serial Port Profiles
146
IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0
General Tab Field Descriptions
Configure the following parameters:
Terminal Type
Specifies the type of terminal connected to the line.
Data Options:
z
Dumb
z
WYSE60
z
VT100
z
ANSI
z
TVI925
z
IBM3151TE
z
VT320 (specifically supporting VT320-7)
z
HP700 (specifically supporting HP700/44)
z
Term1, Term2, Term3 (user-defined terminals)
Default: Dumb
Require Login
When users access the IOLAN through the serial port, they must be
authenticated, using either the local user database or an external authentication
server.
Default: Enabled
User Service
Settings Button
After a user has been successfully authenticated, the IOLAN will connect to
the specified host using the specified protocol according to:
z
the
User Service
parameter for locally configured users
z
the
Default User Service
parameter for users who are externally
authenticated
z
TACACS+/RADIUS for externally authenticated users where the target
host is passed to the IOLAN
User Service Settings on page 150
for field descriptions of the various
User Service Settings.