Panasonic PT-AX100E - Manual (Page 16)

Setting up
16 - E
NGLISH
Getting Started
If the projector is not positioned right in front of the centre of the screen, you can adjust the projected image position
by moving the Shift lever within the shift range of the lens.
J Adjusting the Shift lever
1. Screw the Shift lever counterclockwise to unlock.
2. Move the Shift lever to adjust the projected image position
3. Screw the Shift lever clockwise to lock.
Q Horizontal shift
You can place the projector where the projector lens is up to 25% horizontally off-centre from the screen and
then adjust the image position with the Lens shift feature.
Q Vertical shift
You can place the projector where the projector lens is up to 63% vertically off-centre from the screen and then
adjust the image position with the Lens shift feature.
Lens shift and positioning
Unlock
Up to about 25%
of the projection
Up to about 25%
of the projection
Screen Shifting the lever left:
Moving to screen’s right
Shifting lever right:
Moving to screen’s left
Up to about 63%
of the projection
Up to about 63%
of the projection
Shifting the lever up:
Moving to screen’s top
Shifting the lever down:
Moving to screen’s bottom
Screen