Panasonic PT-AX100E - Manual (Page 34)

34 - E
NGLISH
Settings
OPTION Menu
When you press INPUT or the INPUT SELECT button
to change the input method, the guidance is indicated in
the upper right corner of the screen. The following
display methods are available. Press I H to cycle
through the options.
You can change the background colour of the menu.
Press I H to cycle through the options.
You can change the position where to display the menu.
Press I H to cycle through the options.
You can choose a BLUE or BLACK screen for when the
projector is idle. Press I H to select an option.
You can switch on/off the logo that is displayed when
starting up. Press I H to select an option.
• ON: Active
• OFF: Deactive
When the projector is turned on, the input terminals are
detected and an input signal is selected automatically.
You can switch on/off the system. Press I H to select
an option.
• ON: Active
• OFF: Deactive
You can switch the HDMI signal level NORMAL or
EXPAND when an HDMI (RGB) signal selected. Press
I H to select an option.
INPUT GUIDE
Options Function
OFF Turn off the guidance.
SIMPLE
Display the input method by text.
The INPUT GUIDE will go out
after 5 seconds without any
operation.
DETAILED
Display the input method by
graphic.
The INPUT GUIDE will go out
after 10 seconds without any
operation.
OSD DESIGN
Options Function
TYPE1 Semi transparent black
TYPE2 Solid blue
TYPE3 Semi transparent dark blue
See “Navigating through
the MENU” on page 26.
OSD POSITION
BACK COLOUR
STARTUP LOGO
AUTO SEARCH
NOTE:
When no signal is detected, the last used input
method will be selected.
HDMI SIGNAL LEVEL
UPPER
LEFT
UPPER
CENTRE
UPPER
RIGHT
CENTRE
LOWER
CENTRE
LOWER
RIGHT
LOWER
LEFT