Wss over scan, Keystone, Auto setup – Panasonic PT-AX100E User Manual

Page 33: Position menu, Nglish, Enlarge shrink, Settings j aspect ratio depend on signals

Advertising
background image

POSITION Menu

E

NGLISH

- 33

Settings

J

Aspect ratio depend on signals

Press I H to cycle through the aspect ratio
options. The cycle pattern depends on the
connected signals.

If a PAL/625p (576p)/625i (576i) signal is input and that
signal has an identification signal, the aspect ratio is
automatically switched to the required setting. You can
switch the system off manually.

If the 4 edges of an image is partly dropped, you can use
this function to adjust and project it properly.

Setting range: 0 to +10

OVER SCAN is not available with PC signals.

If the projector is aligned non-perpendicularly to the
screen, or if the projection screen has an angled
surface, you can vertically correct keystone.

Setting range: -32 to 32

You can adjust V - POSITION, H - POSITION, DOT
CLOCK
and CLOCK PHASE automatically when
connecting via PC. Press ENTER to adjust these at the
same time.

VIDEO/

S-VIDEO

4:3 \ 16:9 \ 14:9 \ JUST \
ZOOM1 \ ZOOM2

AUTO \ 4:3 \ 16:9 \ JUST \
ZOOM
NTSC signal

PC (RGB)

4:3 \ 16:9 \ V SCROLL

4:3 \ 16:9
VGA or SVGA signals

V SCROLL only
WIDE768

Not switchable
WIDE480/600/720/768-2 signals

HDMI

4:3 \ 16:9

16:9 \ H - FIT \ V - FIT \ ZOOM
1 125 (1 080)/50i, 1 125 (1 080)/60i,
1 125 (1 080)/50p, 1 125 (1 080)/60p,
1 125 (1 080)/24p, 750 (720)/50p and
750 (720)/60p signals

4:3 \ 16:9 \ JUST \ ZOOM
525p (480p) and 625p (576p) signals

YP

B

P

R

4:3 \ 16:9 \ 14:9 \ JUST \
ZOOM1 \ ZOOM2
625i (576i), 625p (576p)

AUTO \ 4:3 \ 16:9 \ JUST \
ZOOM
525i (480i), 525p (480p)

16:9 \ H - FIT \ V - FIT
1 125 (1 080)/50i, 1 125 (1 080)/60i,
1 125 (1 080)/50p, 1 125 (1 080)/60p,
1 125 (1 080)/24p, 750 (720)/50p,
750 (720)/60p signals

WSS

OVER SCAN

Enlarge

Shrink

KEYSTONE

Image

Operation

NOTE:

You can correct the distortion ± 30 degrees from
the vertical plane. For a better quality image,
installing the projector with a minimum of
distortion is recommended.

Some distortion may be retained for Lens shift
adjustment.

The distortion of the Main menu screen is not
correctable.

The result of the keystone correction will affect on
the aspect ratio and the size of the image.

AUTO SETUP

Advertising