Panasonic PT-AX100E - Manual (Page 28)

28 - E
NGLISH
Settings
PICTURE Menu
Depending on the projection environment, you can use
these preset parameter settings to optimise image
projection. Press I H to cycle through the options.
J Reproducing colour of an sRGB
image
For reproducing the original colour of S-VIDEO
images precisely, set as follows.
1. Press PICTURE ADJUSTMENT and select
NATURAL.
2. Press DEFAULT to reset the other Sub-menu
menu items
3. Press RETURN once to return to the Main menu
and select OPTION
4. Switch the LAMP POWER to NORMAL
You can adjust the contrast of the projected image.
Adjust the BRIGHTNESS in advance if necessary.
Setting range: -32 to +32
You can adjust the brightness of the projected image.
Setting range: -32 to +32
You can adjust the colour saturation of the projected
image.
Setting range: -32 to +32
When PC is connected, this function is available with
1 125 (1 080)/60i, 1 125 (1 080)/50i,
1 125 (1 080)/60p and 1 125 (1 080)/50p signals
only.
PICTURE MODE
For a bright room
NORMAL
Setting for a general image, such as
sports or games
DYNAMIC Bright and sharp setting
VIVID
CINEMA
Vivid and crisp colour setting
For a dark room
CINEMA1 Hollywood style colours
CINEMA2 Deeper and more rich colour setting
VIDEO
Setting for active images, such as
music or concert
NATURAL
Reproduces the original colour of the
image
See “Navigating through
the MENU” on page 26.
NOTE:
It may take for a while until the selected mode is
stabilised.
CONTRAST
BRIGHTNESS
COLOUR
Higher Lower
Brighter Darker
Lighter Darker