Panasonic PT-AX100E - Manual (Page 23)

Remote control operation
E
NGLISH
- 23
Basic Operation
The aspect ratio is selected automatically,
or you can switch it manually by pressing
the ASPECT button. Press the button
several times to cycle through the different
aspect type as follows. See "ASPECT" on
page 32.
You can switch off the POWER
automatically by setting the SLEEP
feature. Press the SLEEP button
several times to cycle through the
duration of time. See "SLEEP" on
page 35.
You can reset most of the customised
settings to the factory defaults by
pressing DEFAULT
button of the
Remote control . Display the
required sub menu or the menu
items and press the button again.
In a dark room, you can turn on the
button backlight to operate the
Remote control. Press the button on
the upper right corner of the unit to
turn on the backlight and enter the
light-on mode. After 5 seconds
without any operation, the backlight is
faded, and it will go out after another 5
seconds. Press any but LIGHT to turn
on again. To escape from the light-on
mode, press the LIGHT button.
You can switch the preset settings by pressing the
THEATER ROOM, LIVING ROOM and FAVORITE
buttons. See "PICTURE MODE" on page 28.
Switching the aspect ratio
VIDEO/
S-VIDEO/
COMPONENT
(YP B P R )
PC (RGB)
HDMI
NOTE:
If you project an image with an unmatched aspect
ratio, the image may distort or some portions may
be cropped. Select an aspect ratio which
preserves the intention of the image creator.
The order of ASPECT types is defined not only by
the input method but also by the input signals.
See "List of compatible signals" on page 41.
If you project a copyrighted image enlarged or
distorted by using ASPECT function in
commercial use in a public place, such as a
restaurant or hotel, you might infringe on the
copyright of the creator which is protected by
copyright law.
Switching off the projector
automatically
4:3
I
H I
H
16:9 14:9
ZOOM2 ZOOM1 JUST
FG FG
I
H I
H
4:3 16:9
V SCROLL
FG
I
H
FG
4:3 16:9
I
H
240MIN. 210MIN. 180MIN. 150MIN.
OFF 60MIN. 90MIN. 120MIN.
I
H I
H I
H
I
H I
H I
H
FG FG
Resetting to the factory
default settings
NOTE:
Some menu items are not available to reset by
pressing the DEFAULT button. Adjust each menu
items manually.
Turning on the button
backlight
Switching the picture
mode
Display the FAVOURITE LOAD menu.
See "FAVOURITE LOAD" on page 30.
CINEMA1 CINEMA2
VIDEO NATURAL
I
H
FG FG
I
H
DYNAMIC NORMAL
VIVID CINEMA
I
H
FG FG