Panasonic PT-AX100E - Manual (Page 27)

Menu Navigation
E
NGLISH
- 27
Settings
Sub-menu items vary by the selected input signal.
J PICTURE menu
See “PICTURE Menu” on page 28.
J POSITION menu
See “POSITION Menu” on page 31.
J LANGUAGE menu
Select the required language option.
J OPTION menu
See “OPTION Menu” on page 34.
Sub-menu
Sub-menu items Default setting
1
1. The default settings vary by the selected PICTURE MODE.
PICTURE MODE NORMAL
CONTRAST 0
BRIGHTNESS 0
COLOUR 0
TINT 0
SHARPNESS 0
COLOUR TEMPERATURE 0
DYNAMIC IRIS ON
LIGHT HARMONIZER AUTO
ADVANCED MENU
FAVOURITE SAVE
FAVOURITE LOAD
SIGNAL MODE
2
2. PC/COMPONENT/HDMI signals only
Sub-menu items Default setting
V - POSITION 0
H - POSITION 0
DOT CLOCK
1
1. PC signal only
0
CLOCK PHASE
2
2. COMPONENT/PC signals only
0
ASPECT AUTO 3
3. 16:9 for PC or HDMI signals
WSS 4
4. VIDEO/S-VIDEO/COMPONENT signals only
ON
OVER SCAN +7
KEYSTONE ON
AUTO SETUP
5
5. PC signal only
Sub-menu items Default setting
INPUT GUIDE DETAILED
OSD DESIGN TYPE1
OSD POSITION CENTRE
BACK COLOUR BLUE
STARTUP LOGO ON
AUTO SEARCH ON
INSTALLATION FRONT/DESK
SLEEP OFF
ALTITUDE LOW
LAMP POWER NORMAL
LAMP RUNTIME
TEST PATTERN