Philips M3860A - Manual (Page 34)

M3860A/M3861A HEARTSTART FR2+
4-8
P
h
ili
ps
Me
dic
a
l
Sy
s
tem
s
The following table describes the parts of the FR2+ tested in the interactive
part of the selftest and any action you are asked to take.
feature test description
speaker Screen prompt: CHECK SPEAKER SOUND (2 beeps)
> Listen for the two beeps from the speaker.
lights Screen prompt: CHECK SHOCK BUTTON LIGHT AND PADS CONNECTOR LIGHT
> Check that the lights come on.
option buttons Screen prompt: PRESS THE OPTION BUTTONS
> Press the blue upper and lower Option buttons and listen for a beep to
confirm each press. Look at the screen to be sure the button presses
have been verified.
display screen Screen prompt: CHECK DISPLAY . ADJUST CONTRAST IF NEEDED
> Check the test pattern displayed on the screen. Adjust the contrast if
desired using the Option buttons.
N O T E : Screen contrast can be adjusted at any time during the interactive
selftest by repeatedly pressing the appropriate Option button until
desired contrast is achieved.
shock button Screen prompt: PRESS THE SHOCK BUTTON
> Press the Shock button and listen for a beep to confirm the press.
No shock will be delivered when you press the Shock button during the
test.
> Look at the screen to be sure the button press has been verified.