Philips M3860A - Manual (Page 35)

Maintaining, Testing, and Troubleshooting Your HeartStart FR2+
4-9
P
h
ili
ps
Me
dic
a
l
Sy
s
tem
s
4
When the interactive part of the battery insertion selftest is complete, the
FR2+ turns off and goes to standby mode to be ready for use.
If proper operation of all features has not been verified in the interactive
selftest, you may want to rerun the battery insertion selftest. If a feature of
operation cannot be verified, contact Philips Medical Systems for technical
support.
Periodic selftests
In addition to the battery insertion selftest, the FR2+ automatically performs
periodic selftests (PSTs). These daily, weekly, and extensive monthly selftests
check many important functions of the FR2+, including battery capacity and
internal circuitry.
If it detects a problem during one of these periodic selftests, the FR2+
beeps and displays a flashing red X or a solid red X on the Status Indicator.
Device history
The FR2+ stores key information about its history in internal memory. To
review the history of your FR2+, select NEXT from the menu screen
displayed when you insert the battery, then select
DEVICE HISTORY from the
next menu displayed.
The device history information is read from the internal memory of the FR2+.
It includes:
USES — how many times the FR2+ has been used (shown in the left
column of numbers) and the total time in minutes it has been used
(shown in the right column of numbers);
SHOCKS — the total number of shocks it has delivered;
TRAINING — how many times it has been used with the training &
administration pack for training (left column) and the total time in minutes
it has been used for training (right column); and
on/off button Screen prompt: PRESS THE ON / OFF BUTTON
> Press the On/Off button and listen for a beep to confirm press.
> Look at the screen to be sure the button press has been verified.
The screen then displays a message that the test is complete.
feature test description