Philips M3860A - Manual (Page 54)

M3860A/M3861A HEARTSTART FR2+
6-6
P
h
ili
ps
Me
dic
a
l
Sy
s
tem
s
2. Within 10 seconds of installing the battery, press the lower Option
button to move the highlight bar to
NEXT .
3. Press the upper Option button to select NEXT .
4. Press the lower Option button to move the highlight bar to SETUP .
5. Press the upper Option button to bring up the SETUP menu.
The SETUP menu allows you to receive setup directly from another
HeartStart FR2+ or a computer running HeartStart Event Review software,
read setup from a data card, or review current setup.
Reviewing current setup
A good way to understand the setup of your FR2+ is to review the setup it
currently uses.
1. Select REVIEW SETUP from the SETUP menu. The first of a series of
REVIEW SETUP screens is displayed.
2. After reviewing the screen contents, press the upper Option button to
select
NEXT and move to the next screen.
3. The last screen allows you to select RETURN and go back to the SETUP
menu.
.
Revising setup
There are several ways to change the setup of your HeartStart FR2+. All of
them require use of products or accessories available separately from Philips
Medical Systems.
Use the M3864A training & administration pack to enable software
within the FR2+ to modify its setup. (Instructions are provided with the
Pack.)
Read a revised setup from a data card containing the setup. (Instructions
are provided later in this chapter.)