Management configuration options, C-32 – Paradyne 3161-B3 User Manual

Page 176

Advertising
background image

C. Configuration Options

C-32

February 2001

3160-A2-GB21-90

Management Configuration Options

The Management configuration options are divided into two tables as follows:

T

General Management Configuration Options (

Table C-9

)

T

Management Trap Configuration Options (

Table C-10

)

NOTE:

A circular symbol (

) identifies configuration options that are available on

standalone DSU/CSUs only. A triangular symbol (

) identifies configuration

options that are available on carrier-mounted DSU/CSUs only.

Table C-9.

General Management Configuration Options (1 of 7)

SNMP Mgt: Disab
Next Enab Disab Prev

SNMP Management Enable. Specifies whether the DSU/CSU responds to SNMP session
requests.

Enab – The DSU/CSU responds to SNMP session requests.

Disab – The DSU/CSU does not respond to SNMP session requests.

NMS Valid: Disab
Next Enab Disab Prev

NMS IP Validation. Specifies whether the DSU/CSU validates (for security reasons) the IP
address of an SNMP manager attempting to access the DSU/CSU. Allowable addresses
are specified using the NMS

n IP Adr configuration option.

Enab – The DSU/CSU validates the IP address of SNMP management systems
attempting to access the DSU/CSU.

Disab – The DSU/CSU does not validate the IP address of SNMP management systems.

Num Sec Mgrs: 1
Next 1 2 3 4 5 6 7 8 9 10 Prev

Number of Security Managers. Specifies the number of SNMP managers that are allowed
to access the DSU/CSU.

NOTE: You must configure an IP address for each SNMP manager that is allowed access
to the DSU/CSU. Allowable addresses are specified using the NMS

n IP Adr configuration

option.

NMS

n IP Adr:

Next Edit Clear Prev

NMS Manager

n IP Address. Specifies the allowable IP address of an SNMP manager

attempting to access the DSU/CSU. The manager number (

n) is specified by the Num Sec

Mgrs configuration option.

Edit – Allows you to edit and/or display the allowable IP address for the SNMP manager.

Clear – Allows you to clear the allowable IP address for the SNMP manager. The IP
address is set to 000.000.000.000.

Advertising
This manual is related to the following products: