Paradyne 3161-B3 - Manual (Page 256)

G. Front Panel Emulation
G-4 February 2001 3160-A2-GB21-90
5. Choose either a Local (for near-end DSU/CSU) or Remote (for far-end
DSU/CSU) destination.
6. If you chose a Local destination, click on the Execute button. If you chose a
Remote destination, enter the telephone number of the far-end DSU/CSU in
the Phone Number field, then click on the Dial button.
7. The front panel of the selected DSU/CSU appears on the PC.
NOTE:
When using Front Panel Emulation, no LEDs are shown on the PC’s
screen; you must use the Stat command procedure to get LED information
(see
Displaying LED Conditions in Chapter 3, Operation).