Paradyne 3161-B3 - Manual (Page 77)

3. Operation
3160-A2-GB21-90 February 2001 3-43
7. From the DTE Channels screen, press F1 to select Assign.
8. Press the Function key below the network channel desired. Each time that you
press the Function key, the DTE channel number will scroll up one number. If
the network channel is currently unassigned (‘‘–” is displayed on Line 2), the
DTE channel number initially displays the same number as the corresponding
network channel number. However, if the network channel is currently
assigned, the DTE channel number is shown as Dn. Pressing the Function key
for D24 wraps the display back to D1. Only those channels that are not already
assigned will appear on the LCD when scrolling. The network channels
assigned to ports (Prt1...Prt4) are unavailable for assignment.
Procedure
To specify DTE Drop/Insert (DSX-1) channels used to carry voice information,
1. Press from the channel allocation screen to return to the DTE Channels
screen.
2. From the DTE Channels screen, press F2 to select Voice.
F1 F2 F3
DTE Channels:
Assign Voice
F1 F2 F3
N1 N2 N3
D1 D2 –
F1 F2 F3
N1 N2 N3
D1 D2 –
F1 F2 F3
DTE Channels:
Assign Voice