Panasonic AJ-HDC27V - Manual (Page 102)

102
Setting menu screens
(VTR MAIN MENU)
<Note>
When USER is set for the UB MODE item, it is not possible to set
EXT for the VITC UB MODE item.
Similarly, it is not possible to set EXT for the UB MODE item when
USER has been set for the VITC UB MODE item.
TC/UB screen
The time code and user’s bit settings are performed on
this screen.
Item
Variable
range
Remarks
TC MODE DF
NDF
VF
display
Item
Variable
range
Remarks
VF
display
USER
ENG For setting the time code
to the DF or NDF mode.
DF : The time code is set
to the drop frame
mode.
NDF : The time code is set
to the non-drop
frame mode.
<Note>
This unit will perform the
processing in the non-drop
frame mode when the
frame rate has been set to
24 frames/sec. (23.98 Hz).
UB MODE USER
DATE
TIME
EXT
TCG USER
ENG For setting what is to be
written as the user’s bit in
the LTC area.
USER : User setting (fixed).
DATE : Real time value for
year/month/day/
hours.
TIME : Real time value for
hours/minutes/
seconds.
EXT : The UBG value is
slave-locked when
a TC signal is
supplied from an
external source.
(The user setting is
used when no
external input is
supplied.)
TCG : Time code
generator value
<Note>
Set the time on the
TIME/DATE menu screen
when using the UB MODE
item with real-time
operation.
TCG SET HOLDON
OFF
USER
ENG For selecting the operation
of TCG when the TCG
SET
5 power OFF 5
power ON 5 REC
operations are performed.
ON : The TCG setting is
stored when the
power is turned off,
and is not
regenerated.
OFF : The TCG setting is
not stored when the
power is turned off,
but is regenerated.
The underlining in the variable range column indicates the setting in the preset mode.
FIRST REC TC REGEN
PRESET USER
ENG For setting the TC REGEN
mode when recording is
started.
REGEN:
The time code set on the
tape is regenerated.
However, when the
frame rate has been set
to 24 frames/sec. (23.98
Hz), the time code on
the tape in those parts
where the drop frame
mode was established
will not be regenerated.
PRESET:
The time code set on the
tape is not regenerated.
However, it is forcibly
regenerated when the
unit is transferred from
the rec-pause mode to
the recording mode.
This unit automatically stores as the tape management information both the frame rate information which indicates the shooting speed and
the active frame information which indicates the first frame where the frame image was switched in the user’s bit of the sub-code track area
(this used to be the LTC area). This information is output from the TC OUT connector and HD SDI OUT connector. Further, the active
frame information is stored in the least significant digit of the user’s bit while the frame rate information is stored in its lower third and fourth
digits.
<Notes>
O When “DATE,” “TCG” or “USER” has been selected as the UB MODE item setting on the TC/UB screen, the tape management
information is output from the least significant digit to the lower fourth digit of the user’s bit, so no other user’s bit information will be
output.
O The tape management information is not output as the user’s bit information in the VIDEO AUX area (this used to be the VITC area).