Panasonic AJ-HDC27V - Manual (Page 19)

19
1A B 0dB C Z73
¢¢¢¢ VTR USER MENU ¢¢¢¢
¢¢¢¢ CAM USER MENU ¢¢¢¢
Menu operation section
1
Setup card insertion slot
The setup card, available as an optional accessory,
is inserted into this slot.
2
MENU button
When this is pressed, the camera unit’s user menu
screen, which was set at the time of shipment,
appears.
When it is pressed again, the VTR unit’s user menu
screen appears.
When it is pressed once more, the menu screen
display is cleared.
The selection of the menu for the user menu can be
changed on the USER MENU SELECT screen.
3 JOG dial button
When this dial button is turned while the menu
screen is displayed, the cursor is moved to each of
the setting items.
The menu items are set by operating this dial
button.
There are two types of menus, MAIN and SUB, and
each menu is displayed on a page-by-page basis.
The menu configuration can be changed to suit the
desired objective.
For details on the menu operation method, refer to
“Menu operations” on pages 72 to 74.
Parts and their functions
When the power is turned on
Status display
Camera unit’s user
menu
VTR unit’s user
menu
Press the MENU
button.
Press the MENU
button.
Press the MENU button.
3 2 1
Time code related section (1)
1
GENLOCK IN connector (BNC)
Supply the analog HD reference signal to this
connector for gen-locking the camera unit or when
externally locking the time code.
2 TC IN connector (BNC)
Supply the time code which will serve as the
reference to this connector when externally locking
the time code.
3
TC OUT connector (BNC)
To lock the time code of an external VTR to the
unit’s time code, connect this connector to the time
code input (TC IN) connector on the external VTR.
3 2
1