Panasonic AJ-HDC27V - Manual (Page 61)

61
Use of the setup memory card (optional accessory)
enables the setting menu contents to be saved. Use
of this data speeds up the process of reproducing
suitable setup statuses.
O The multimedia cards or the SD memory cards can
be used as the setup cards.
How to eject the setup card
Open the cover by raising its bottom edge, and eject
the setup card.
<Note>
Take care not to touch the connector on the edge of
the setup card directly.
How to insert the setup card
With the surface bearing the logo facing you, insert
the setup card into the setup card slot, and close the
cover.
<Note>
Check that the surface bearing the logo is facing you
and the lettering is not upside down before inserting
the card.
When inserting the card, check the direction in which
the card is pointing, and if it does not slide neatly into
place, it means that the card may be pointing in the
wrong direction or that it may be upside down. Do not
force the card into place but check which is the front
and back and which is the top and bottom, and try
inserting the card again.
Bear in mind the following points when using
and saving the setup cards.
O Avoid high temperatures and high humidity levels.
O Keep the cards away from water.
O Avoid exposing the cards to electrical charges.
Keep the setup card inside the unit with the cover
closed.
Setup card operations