Panasonic AJ-HDC27V - Manual (Page 22)

22
Power supply
Using the Panasonic AU-BP402
battery pack
<Notes>
O Do not pull the rubber cap forcefully.
O When mounting the battery case, take care not to
pinch the connecting cord.
1
Detach the battery mount.
3
Attach the AU-M402H battery case.
Open the battery case cover, and raise it above the
rubber cap: screw holes will now be visible.
Tighten the screws using a screwdriver, then
attach the case to the unit and tighten the screws
fully.
2
Connect the AU-M402H battery case connector
with the connector on the unit.
4
Connect the plug on the battery pack to the
connector inside the case, and insert the battery
pack.
<Note>
Before connecting or disconnecting the plug, be
absolutely sure to turn off the unit’s power.