Panasonic AJ-HDC27V - Manual (Page 60)

60
How to use the user data
The contents of the setting menus can be saved in the
user area of the camera’s memory, and they can be
loaded from this area. Use of this data speeds up the
process of reproducing suitable setup statuses.
User data operation
Menus are used to save the setting menu contents in
the user area of the camera’s memory and load them
from this area.
Saving the user data
Loading the user data
1
Perform the menu operations (pages 72 to 74),
and display the “INITIALIZE” screen of CAM MAIN
MENU 4.
2
Turn the JOG dial button to move the arrow
(cursor) to the WRITE USER DATA item.
4
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
The data settings are saved in the user area of the
camera’s memory.
5
After the data has been saved, press the MENU
button twice.
The setting menu is cleared, and the display
showing the unit’s current statuses appears at the
top and bottom of the viewfinder screen.
1
Perform the menu operations (pages 72 to 74),
and display the “CAM CARD READ/WRITE”
screen of CAM MAIN MENU 3.
2
Turn the JOG dial button to move the arrow
(cursor) to the READ USER DATA item.
4
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
The data settings saved in the user area of the
camera’s memory are loaded, and the settings are
completed.
5
Press the MENU button twice.
The setting menu is cleared, and the display
showing the unit’s current statuses appears at the
top and bottom of the viewfinder screen.
n< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
TITLE :
n< INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
SCENE SEL :1
READ
WRITE
TITLE1
TITLE2
TITLE3
TITLE4
3
When the JOG dial button is pressed, the following
message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
READ ?
YES
n NO
3
When the JOG dial button is pressed, the following
message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE ?
YES
n NO