Panasonic AJ-HDC27V - Manual (Page 50)

50
Adjusting the white balance and black balance
Adjusting the white balance
When FILTER INH is set to ON
When AWB is adjusted, the color temperature and
filter number applying at the time are displayed.
If the filter is then turned, the color temperature and
filter number are displayed.
The white balance is almost fully adjusted if the
subject is illuminated at a color temperature
approaching the one displayed.
AWB is adjusted using subject filter (B) with a
lighting color temperature of 3200 K.
(Example of display)
AWB A OK 3.2K
7
The filter is changed to filter (C)
7
The filter (B) is restored.
7
“4.3 K (B)” is displayed.
(1): This indicates that AWB was adjusted using
the filter.
4.3K(B)
7
“3.2 K (B)” is displayed, and the status when AWB
was first adjusted is indicated.
3.2K(B)
If the color temperature of the subject in this state
is near 4.3 K, the white balance is right and so the
camera can be used.
7