Panasonic AJ-HDC27V - Manual (Page 103)

103
Setting menu screens
(VTR MAIN MENU)
The time code and user’s bit settings are performed on
this screen.
The underlining in the variable range column indicates the setting in the preset mode.
TC/UB screen
Item
Variable
range
Remarks
VF
display
VITC UB MODE USER
DATE
TIME
EXT
TCG USER
ENG For setting what is to be
written as the user’s bit in
the VITC area.
USER : User setting (fixed).
DATE : Real time value for
year/month/day/hou
rs.
TIME : Real time value for
hours/minutes/seco
nds.
EXT : The UBG value is
slave-locked when
a TC signal is
supplied from an
external source.
(The user setting is
used when no
external input is
supplied.)
TCG : Time code
generator value
<Notes>
O Set the time on the
TIME/DATE menu
screen when using the
UB MODE item with
real-time operation.
O The tape management
information is not
output as the user’s bit
information in the
VITC area.
Item
Variable
range
Remarks
VF
display
P. OFF LCD
DISPLAY ON
OFF USER
ENG For setting whether the
LCD display is to appear
when the power is OFF.
ON : The LCD display
appears even when
the power is OFF.
OFF : The LCD display
does not appear
when the power is
OFF.
The power-saving mode is
established.
TC OUT TCG
TCG/TCR USER
ENG For selecting the time
code which is to be output
to the time code output
connector.
TCG:
The time code generated
by the time code
generator is output at all
times.
TCG/TCR:
The time code generated
by the time code
generator is output in the
E-E mode; the time code
reader value is output in
the V-V mode.