Panasonic AJ-HDC27V - Manual (Page 83)

83
HIGH SETTING screen
The high level gain is set on this screen.
Item
Variable
range
Remarks
MASTER GAIN –6dB
:
12dB
:
30dB
VF
display
USER
ENG –6dB, –3 dB, 0 dB, 3 dB, 6
dB, 9 dB, 12 dB, 18 dB, 24
dB or 30 dB can be set.
H. DTL LEVEL 0
:
12
:
63
USER
ENG For setting H.DTL (detail)
level.
V. DTL LEVEL 0
:
16
:
63
USER
ENG For setting V.DTL (detail)
level.
DTL CORING 0
:
5
:
15
USER
ENG For setting DTL coring.
H. DTL FREQ 0
:
22
:
29
USER
ENG For selecting H.DTL
FREQUENCY.
LEVEL DEPEND 0
:
5
USER
ENG For setting LEVEL
DEPEND.
The detail of only the dark
areas is removed when
the Y detail is boosted.
The higher the figure set
for this item, the broader
the range of the detail
which is removed.
MASTER
GAMMA 0.35
:
0.45
:
0.75
USER
ENG Master gamma setting.
(0.01 step)
BLACK
STRETCH ON
OFF USER
ENG For setting the mode to
compensate for low-
brightness black stretch to
ON or OFF.
MATRIX TABLE A
B
OFF USER
ENG For selecting the color
correction matrix table.
COLOR
CORRECTION ON
OFF USER
ENG For setting the 12-axis
independent color
correction to ON or OFF.
The underlining in the variable range column indicates the setting in the preset mode.
Setting menu screens
(CAM MAIN MENU 1)
ADDITIONAL DTL 1 screen
The special detail features of the camera are set on
this screen.
Item
Variable
range
Remarks
KNEE
APERTURE ON
OFF
VF
display
USER
ENG For setting the knee
aperture to ON or OFF.
At the “ON” setting, the
detail above the knee
point is boosted.
SLIM DTL ON
OFF USER
ENG For setting the mode to
make the detail finer to
ON or OFF.
ADDITIONAL DTL2 screen
The special detail features of the camera are set on
this screen.
Item
Variable
range
Remarks
KNEE APA LVL 0
5
VF
display
USER
ENG For changing the detail
level in the high-
brightness areas.
DTL GAIN (+) –31
:
+00
:
+31
USER
ENG For changing the H detail
level in the “+” direction.
DTL GAIN (–) –31
:
+00
:
+31
USER
ENG For changing the H detail
level in the “–” (bottom)
direction.
DTL CLIP 00
:
47
:
63
USER
ENG For changing the clipping
level of the detail signal.
DTL SOURCE (G+B)/2
(R+G)/2
(2G+R+B)/4
(3G+R)/4
R
G USER
ENG For setting the ratio
between the RGB signal
components which
generate the detail signal.
V DTL FREQ. 360TV
450TV
540TV
630TV
720TV USER
ENG For setting the V. DTL
FREQUENCY.