Using the touch-sensitive grips, Using smartrate, Using the touch-sensitive grips using smartrate – Precor EFX 5.25 User Manual
Page 16
 
Owner’s Manual: Heart Rate Features
14
Using the Touch-Sensitive Grips
While exercising on the EFX, you must grasp both touch-
sensitive grips for a minimum of five to ten seconds to 
transmit your heart rate to the display. Refer to Diagram 6.
Diagram 6: Touch-sensitive grips
Usually, the concentration of salts in a person's 
perspiration provides enough conductivity to transmit a 
signal to the receiver inside the display console. However, 
some people, because of body chemistry or erratic heart 
beats cannot use the touch-sensitive heart rate feature on 
the EFX.
Using SmartRate
The SmartRate feature helps you monitor and maintain 
your heart rate in the target zone best suited to your 
specific needs.
When the EFX detects a heart rate, a single bar blinks and 
indicates your current heart rate zone. All 10 bars may 
appear during an exercise session.
Important: To use the SmartRate feature, you must 
choose a program and enter your age during the setup 
phase of your exercise session.
Table 1 shows the percents used in calculating the heart 
rate target zones. While your heart rate remains within 
these zones, the corresponding bar blinks and provides a 
visual cue.
The calculation used to determine your maximum aerobic 
heart rate is (220 minus your age). When you multiply it by 
the percent indicated in Table 1, you can understand the 
relation-ship between the blinking bar and your target heart 
rate.
CAUTION: Your heart rate should never exceed 87% of 
your maximum aerobic heart rate or go above PEAK. If it 
does, immediately reduce your strides per minute and 
adjust the CrossRamp or resistance to return your heart 
rate to your physician-recommended target zone.
EFX
®
5.25
EFX
®
5.23
52x-V_Owners Manual.book Page 14 Monday, June 2, 2008 4:09 PM