Precor EFX 5.25 - Manual (Page 40)

Owner’s Manual: Advanced Programming and Troubleshooting 38
Advanced Programming and Troubleshooting
Certain features remain hidden and can only be accessed
using special key presses. Read this section if you want to:
• Select the units of measure
• View the odometer
• Display the number of hours you have used your EFX
• View the software versions and part numbers
• Check the error log
In general, you would only access this information if
directed to do so by Precor Customer Support.
Advanced Programming Tips
• Always start at the Precor banner.
• The advanced programming and troubleshooting mode
is accessed by pressing and holding the ENTER key at
the Precor banner, then entering the appropriate key
combination. Any remaining key presses must occur
quickly and without pause.
• The QUICKSTART key is disabled while in advanced
programming mode.
• Use the arrow keys to change blinking prompts.
• Press ENTER to make selections and RESET to return
to the Precor banner.
52x-V_Owners Manual.book Page 38 Monday, June 2, 2008 4:09 PM