Precor EFX 5.25 - Manual (Page 42)

Owner’s Manual: Advanced Programming and Troubleshooting 40
Viewing the Error Log
The error log displays information about errors that may
have occurred while using the EFX. Up to ten errors are
recorded along with the odometer and hour meter values
at the time the error occurred.
1. At the Precor banner, press and hold the RESET key
for at least four seconds to view the error log. The most
recent error recorded appears on the lower display.
Refer to Diagram 8.
Note: If there are no errors in the log, NO ERRORS
appears on the display.
Diagram 8: Error log
2. Use the arrow keys to cycle through the error log.
3. Copy the error code information to paper so you can
provide it to Customer Support if needed. Be sure to
copy it exactly as shown.
4. When you no longer need the information in the error
log, press QUICKSTART for at least four seconds to
erase it. NO ERRORS appears on the display and
remains static to let you know when the error log has
been cleared.
Important: You cannot retrieve the error log once you
have cleared it. You may want to resolve any issues
you are experiencing with the EFX before clearing the
error log.
5. When you are ready, press RESET to return to the
Precor banner. 1‐Error 40 AT 1234567 STRIDES 1714 HOURS
Most recent error
Error code
The hour meter at the time
the error was detected
Odometer reading at the
time the error occurred
52x-V_Owners Manual.book Page 40 Monday, June 2, 2008 4:09 PM