Mechanical – National Instruments NI PXIe-1075 User Manual
Page 52
Appendix A
Specifications
© National Instruments Corporation
A-11
Notes
For PXIe slot to PXI_DSTAR mapping refer to the
section
of Chapter 1,
For other specifications, the NI PXIe-1075 complies with the PXI-5 PXI Express
Hardware Specification.
Mechanical
Overall dimensions
Standard chassis
Height ...................................... 6.97 in. (177.1 mm)
Width ....................................... 18.30 in. (464.8 mm)
Depth ....................................... 18.40 in. (467.4 mm)
Note
0.57 in. (14.5 mm) is added to height when feet are installed. When tilted with front
feet extended on table top, height is increased approximately 2.08 in. (52.8 mm) in front
and 0.583 in. (14.8 mm) in rear.
Weight .................................................... 14.06 kg (31.0 lb)
Chassis materials.................................... Sheet Aluminum (5052-H32,
3003-H14, and 6061-T6),
Extruded Aluminum (6060-T6),
and Cold Rolled Steel, PC-ABS,
Santoprene, Nylon
Finish...................................................... Conductive Clear Iridite
on Aluminum
Electroplated Nickel
on Cold Rolled Steel
Polyurethane Enamel
Figures A-1 and A-2 show the NI PXIe-1075 chassis dimensions. The
holes shown are for the installation of the optional rack mount kits. You can
install those kits on the front or rear of the chassis, depending on which end
of the chassis you want to face toward the front of the instrument cabinet.
Notice that the front and rear chassis mounting holes (size M4) are
symmetrical.