National Instruments NI PXIe-1075 - Manual (Page 56)

© National Instruments Corporation B-1 NI PXIe-1075 User Manual
B
Pinouts
This appendix describes the connector pinouts for the NI PXIe-1075
chassis backplane.
Figure B-1 illustrates the types of PXIe connectors by providing a layout of
the PXI Express system controller slot (slot 1).
Table B-1 shows the XP4 Connector Pinout for the System Controller slot.
Table B-2 shows the XP3 Connector Pinout for the System Controller slot.
Table B-3 shows the XP2 Connector Pinout for the System Controller slot.
Table B-4 shows the XP1 connector pinout for the System Controller slot.
Table B-5 shows the XP4 Connector Pinout for the System Timing slot.
Table B-6 shows the XP3 Connector Pinout for the System Timing slot.
Table B-7 shows the TP2 Connector Pinout for the System Timing slot.
Table B-8 shows the TP1 Connector Pinout for the System Timing slot.
Table B-9 shows the XP4 Connector Pinout for the Hybrid peripheral slots.
Table B-10 shows the XP3 Connector Pinout for the Hybrid
peripheral slots.
Table B-11 shows the P1 connector pinout for the Hybrid peripheral slots.
For more detailed information, refer to the PXI-5 PXI Express Hardware
Specification, Revision 2.0. Contact the PXI Systems Alliance for a copy
of the specification.