Safety, Electromagnetic compatibility, Ce compliance – National Instruments NI PXI-1056 User Manual
Page 40
Appendix A
Specifications
A-4
ni.com
Safety
The PXI-1056 was designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control, and
laboratory use:
•
EN 61010-1, IEC 61010-1
•
UL 61010-1
•
CAN/CSA-C22.2 No. 61010-1
Note
For UL and other safety certifications, refer to the product label, or visit
ni.com/certification
, search by model number or product line, and click the
appropriate link in the Certification column.
Electromagnetic Compatibility
EMC........................................................CE, C-Tick, and FCC Part 15
(Class A) compliant
Emissions................................................EN 55011 Class A @ 10 m
FCC Part 15A above 1 GHz
Immunity ................................................Evaluated to EN 61326:1997 +
A2:2001, Table 1
Note
For EMC compliance, operate this device with shielded cabling.
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC
Note
Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification
, search by model number or product line, and click the
appropriate link in the Certification column.