Mechanical – National Instruments NI PXI-1056 User Manual
Page 43
Appendix A
Specifications
© National Instruments Corporation
A-7
Maximum jitter introduced
by backplane circuitry..................... 1 ps RMS in 10 Hz to 1 MHz
range
Mechanical
Overall dimensions (standard chassis)
Height.............................................. 177.8 mm (7.0 in.)
Note
14.5 mm (0.57 in.) is added to height when feet are installed.
Width .............................................. 431.8 mm (17.0 in.)
Depth............................................... 457.2 mm (18.0 in.)
Weight............................................. 11 kg (24.3 lbs)
Chassis materials.................................... Sheet Aluminum (5052-H32,
3003-H14, and 6061-T6),
Extruded Aluminum (6060-T6),
Cold Rolled Steel, PC-ABS,
Santoprene, Nylon
Finish...................................................... Conductive Clear Iridite
on Aluminum
Clear Chromate Zinc Plating
on Cold Rolled Steel
Polyurethane Enamel
Figures A-1 and A-2 show the PXI-1056 dimensions. The holes shown are
for the installation of the optional rack-mount kits as shown in Figure A-3.
Notice that the front and rear rack mounting holes (size M4) are
symmetrical.