Table 1-1. ac power cables, Key features, Key features -2 – National Instruments NI PXI-1056 User Manual
Page 9
Chapter 1
Getting Started
1-2
ni.com
If you are missing any of the items listed in Table 1-1, or if you have the
incorrect AC power cable, contact National Instruments.
Key Features
The PXI-1056 combines a high-performance 18 slot 3U-sized (or 4 3U and
7 6U slot) PXI backplane with a high-output power supply and a structural
design that has been optimized for maximum usability in a wide range of
applications. The modular design of the chassis ensures a high level of
maintainability, resulting in a very low mean time to repair (MTTR). The
PXI-1056 complies with the PXI Hardware Specification, Revision 2.2
(32-bit), offering advanced timing and synchronization features.
Note
The PXI-1056 chassis only complies with the 32-bit/33 MHz operational specs of
the PXI Hardware Specification.
The key features of the PXI-1056 include the following:
•
PXI and CompactPCI (PICMG 2.0 R 3.0) module compatibility
•
4 3U-sized and 7 6U-sized dual-stack capable slots
•
Universal AC input: automatic voltage and frequency ranging
•
Over-current protection through push-reset circuit breaker (no
AC-input fuses to replace)
•
Removable modular power-supply shuttle
•
Remote voltage, temperature, and fan monitoring through a rear-panel
RS-232 connector
•
On/Off (Standby) power switch on the front panel for easy access
Table 1-1. AC Power Cables
Power Cable
Reference Standards
Standard 120 V (USA)
NEMA 5-15
Switzerland 220 V
SEV
Australia 240 V
AS C112
Universal Euro 230 V
CEE (7), II, IV, VII IEC83
North America 240 V
NEMA 6-15
United Kingdom 230 V
BS 1363/IEC83