NetComm HS960 - Manual (Page 15)

YML857 Rev1 HS960 Wireless Gateway User Guide
www.netcomm.com.au 15
2-2 Connecting the Antennas
The HS960 provides two antenna connectors on the rear of the unit.
Figure - Antenna Connectors
2-3 Installation Requirements
Before installing the HS960 please ensure your network meets the following requirements.
System Requirements
The HS960 requires one of the following types of software:
• Windows 98 Second Edition/NT/2000/XP
• Red Hat Linux 7.3 or later version
• MAC OS X 10.2.4 or later version
• Any TCP/IP-enabled systems like Mac OS and UNIX (TCP/IP protocol installed)
• Standard phone line for xDSL modem
Or
Coaxial cable for Cable modem
• Web Browser Software (Microsoft I.E 5.0 or later version or Netscape Navigator 5.0 or later version)
• One computer with an installed 10Mbps, 100Mbps or 10/100Mbps Ethernet card
• UTP network Cable with a RJ-45 connection
Note: Prepare twisted-pair cables with RJ-5 plugs. Use Cat.5 cable for all connections. Make sure each cable does not exceed 100 meters.