NetComm HS960 - Manual (Page 38)

HS960 Wireless Gateway User Guide YML857 Rev1
8 www.netcomm.com.au
Item Default Description
System/Host Name Empty The system name can consist of up to 40 alphanumeric characters.
Domain Name Empty The Domain name can consist of up to 80 alphanumeric characters.
Location Information Empty Enter your location information.
Item Default Description
NAT (Network Address Translation)
NAT Enable Enables or disables NAT Address Translation function.
User Session Limited Enable,30 Enables or disables user session limit function. This feature provides you with
an ability to control a number of sessions allowed for particulars user(s) at the
one time.
IP Plug and Play (iPnP
Technology) Enable Enables or disables plug & play function. When enabled, the user needn’t
change their network configuration to access the Internet.
Layer 2 Isolation
Security Enable If enable plug and play is selected, you can enable Layer 2 Isolation Security
function. When the “Layer 2 Isolation Security” enabled, your users will be unable
to see each other on the network.
Secure administrator IP
Addresses Any Administrator can specify 5 IP addresses or a range to allow remote control
access from network.
Multicast Pass Through Disable This function allows for multiple transmissions to specific recipients at same time.
Allow remote user to
ping the device Enable This function allows remote user to ping the HS960 through Internet.
SSL Certificate Default Option: default or customise certificate. There are two ways to create a
certificate. The first is to purchase a certificate from a certificate authority and
another is creating a self-certificate.
Click Apply button, then Restart dialog box will appear. Click Apply to restart the system.
Figure -5 Restart Dialog Box