NetComm HS960 - Manual (Page 29)

YML857 Rev1 HS960 Wireless Gateway User Guide
www.netcomm.com.au 9
3-1-7 Billing Profile Settings
This function is used to setup the billing profiles. The billing profiles are linked to the three buttons on the
printer and allocate how you want to charge the customer.
Figure -1 Billing Profile Setting Screen
Item Default Description
Service Time to Finish Time to Finish
The subscriber can access Internet only once with one account. Once subscriber
has logged in, the pre-defined usage time will start and will run until the time runs
out, even if the subscriber logs out and is not active, once activated the time expires
after the physical time elapses.
Accumulation
The subscriber can access the Internet multiple times and on multiple occasions
with the one account. The system will accumulate every individual usage times,
until the pre-defined usage time runs out.
Currency $ Enter the appropriate currency unit or currency symbol.
Number of decimal
places 2 Enter the billing decimal value. The field maximum value is 3.
Name 30 minutes/1
hour/ 2 hours This is the name of billing profile. The maximum allowed characters length is 12.
Usage Time 30 minutes/1
hour/ 2 hours The duration of the billing period. When this period expires, user account will
be discontinued.
Charge 1.00/2.00/3.00 Enter the charge amount for the Internet service. The amount maximum value
is 999999.