NetComm HS960 - Manual (Page 97)

YML857 Rev1 HS960 Wireless Gateway User Guide
www.netcomm.com.au 97
3-2-22 SNMP
The SNMP Agent Configuration screen enables you to access to your device via Simple Network
Management Protocol. You must first enable SNMP on the SNMP Agent Configuration screen.
Figure -10 SNMP Setting Screen
Item Default Description
SNMP Disable Disables or enables the SNMP management.
SNMP Port 161 If the SNMP enables, also allowed to specific the SNMP port number via NAT.
The allowed SNMP port numbers are 161 (default), 16100-16199 and Trap
port numbers are 162 (default), 16200-16299. This Port setting is useful for
remote control via NAT network.
Trap Port 162
Configuration
Community Name public/private Every unit with SNMP enable must be configured to recognize one or more
community names up to 20 characters. The default setting for the community
of entry 1 is “public” and for the entry 2 is “private” and others are empty.
NMS Address ANY The address of the NMS. The default settings for the NMS Networking are
“ANY”.
Privileges Read/Write Choose “Read”, “Write”, “Trap Recipients” and “All” for different privileges. The
default setting of the entry 2 is “write” and others are “read”.
Status Valid/Invalid Chosen “Valid” or “Invalid”. The default setting of entry 1, 2 are valid and others
are invalid.