NetComm HS960 - Manual (Page 43)

YML857 Rev1 HS960 Wireless Gateway User Guide
www.netcomm.com.au 
PPTP
Figure - PPTP Setting Screen
Item Default Description
My IP Address Empty A PPTP local IP address for the xDSL/Cable connection (provided by your ISP).
My Subnet Mask Empty Enter the PPTP local IP address for the xDSL/Cable connection.
Gateway IP Address Empty A PPTP local default gateway for the xDSL/Cable connection (provided by your ISP).
PPTP Server IP Address Empty Enter the PPTP server IP address for the xDSL/Cable connection (provided by your ISP).
Username Empty Enter your PPTP account name. The user name can consist of up to 80
alphanumeric characters and is case sensitive.
Item Default Description
Password Empty Enter your PPTP password. The password can consist of up to 80 alphanumeric
characters and is case sensitive.
PPP MTU Setting 1460 MTU (Maximum Transfer Unit) specifies maximum transmission unit size.
TCP MSS Setting 1400 MSS (Maximum Segment Size) specifies maximum segment size.
Connection ID/Name Empty Enter the connection ID or connection name. The connection ID/Name can
consist of up to 81 alphanumeric characters and is case sensitive.
Connect on Demand and Max Idle Time
Connect on Demand Enable You can configure your HS960 to cut your connection with your ISP after a specified
period of time (Max Idle Time). If you have been disconnected due to inactivity, Connect
on Demand enables your HS960 to automatically re-establish your connection as
soon as you attempt to access the Internet again. If you wish to activate Connect on
Demand, click the radio button. If you want your Internet connection to remain, click
the radio button of keep alive. The Max Idle Time maximum value is 65535 minutes.
Max Idle Time 10 Minutes
Keep alive and Redial Period
Keep alive Disable This option keeps your PPTP enabled Internet access connected indefinitely,
even when it sits idle. The Redial Period maximum value is 65535 seconds.
Redial Period 30 Seconds