NetComm HS960 - Manual (Page 25)

YML857 Rev1 HS960 Wireless Gateway User Guide
www.netcomm.com.au 5
Item Default Description
My IP Address Empty Enter the PPTP local IP address provided by your ISP.
My Subnet Mask Empty Enter the PPTP local Subnet Mask IP address for the IP address (My IP Address).
Gateway IP Address Empty Enter the PPTP server Gateway IP address provided by your ISP.
PPTP Server IP
Address Empty Enter the PPTP server IP address provided by your ISP.
Username Empty Enter the user name provided by your ISP. The user name can consist of up to
80 alphanumeric characters and is case sensitive.
Password Empty Enter the user password provided by your ISP. The password can consist of up
to 80 alphanumeric characters and is case sensitive.
PPP MTU Setting 1460 MTU (Maximum Transfer Unit) specifies maximum transmission unit size.
TCP MSS Setting 1400 MSS (Maximum Segment Size) specifies maximum segment size.
Connection ID/Name Empty Enter the connection ID or connection name. The connection ID/Name can
consist of up to 81 alphanumeric characters and is case sensitive.
Connect on Demand and Max Idle Time
Connect on Demand Enable You can configure your HS960 to cut your connection with your ISP after a
specified period of time (Max Idle Time). If you have been disconnected due to
inactivity, Connect on Demand enables your HS960 to automatically re-establish
your connection as soon as you attempt to access the Internet again. If you wish
to activate Connect on Demand, click the radio button. If you want your Internet
connection to remain, click the radio button of keep alive. The Max Idle Time
maximum value is 65535 minutes.
Max Idle Time 10 Minutes
Keep alive and Redial Period
Keep alive Disable This option keeps your PPTP enabled Internet access connected indefinitely,
even when it sits idle. The Redial Period maximum value is 65535 seconds.
Redial Period 30 Seconds