NetComm HS960 - Manual (Page 42)

HS960 Wireless Gateway User Guide YML857 Rev1
 www.netcomm.com.au
PPPoE
Figure - PPPoE Setting Screen
Item Default Description
User Name Empty Enter your PPPoE account name. The user name can consist of up to 80
alphanumeric characters and is case sensitive.
Password Empty Enter your PPPoE password. The password can consist of up to 80
alphanumeric characters and is case sensitive.
PPP MTU Setting 1492 MTU (Maximum Transfer Unit) specifies maximum transmission unit size.
TCP MSS Setting 1452 MSS (Maximum Segment Size) specifies maximum segment size.
Item Default Description
Service Name Empty Enter the service name provided by your ISP. The service name can consist of up
to 64 alphanumeric characters and is case sensitive.
Connect on Demand and Max Idle Time
Connect on Demand Enable You can configure your HS960 to cut your connection with your ISP after a
specified period of time (Max Idle Time). If you have been disconnected due
to inactivity, Connect on Demand enables your HS960 to automatically re-
establish your connection as soon as you attempt to access the Internet again.
If you wish to activate Connect on Demand, click the radio button. If you want
your Internet connection to remain, click the radio button of keep alive. The
Max Idle Time maximum value is 65535 minutes.
Max Idle Time 10 Minutes
Keep alive and Redial Period
Keep alive Disable This option keeps your PPPoE enabled Internet access connected indefinitely,
even when it sits idle. The Redial Period maximum value is 65535 seconds.
Redial Period 30 Seconds