Nortel Networks CALLPILOT 555-7101-215 - Manual (Page 22)

702t server description Standard 1.0
22 CallPilot
In this illustration, the telephony LAN (TLAN) provides IP connectivity
between the Succession CSE 1000 system and the i2004 Internet phonesets.
The connection between the Call Server and Media Gateway can be point-
to-point, or it can be through the LAN, if the system is installed in a
distributed data network.
For information about the Succession CSE 1000 system and i2004 Internet
phoneset bandwidth and network requirements, refer to the Succession
Communication Server for Enterprise 1000 Planning and Installation Guide
(NTP 553-3023-210).
Switch connectivity
For more details about how the 702t server and switch connection is
established, refer to Part 3 in the CallPilot Installation and Configuration
binder.
LAN connectivity
The 702t server provides 10/100Base-T Ethernet network connectivity. See
“Rear panel diagram” on page 13 and “Slot assignments” on page 14 for
details on the location of network interface cards. The function of each
network interface card is described below:
„ An Ethernet controller on the server’s motherboard provides connectivity
to the ELAN.
For information about the ELAN’s purpose and requirements, see “About
the ELAN” in Part 1 of the CallPilot Installation and Configuration
binder.
„ An optional network interface card (NIC) is installed in the server.
This optional NIC is required only for Meridian 1 or Succession
CSE 1000 systems that require a CLAN connection (in addition to the
ELAN connection). The CLAN provides data connectivity between
desktop and web messaging clients and the CallPilot server.